What Is an ARC Filter For Treadmill [Explained]

Looking for an answer to the question of what is an arc filter for treadmill? Here is the explained answer for you.

An arc filter can be used in a treadmill air cooling system to soften the airflow from the fan blades. The arc filter in a treadmill is a cylindrical air filter device that is generally located at the base of the treadmill.

It has a metal exterior and is mounted with plastic insulators to prevent contact between any electrical components inside.

The arc filter in a treadmill will help clean the air passing through it and make sure the airflow going into your machine is as powerful but safe as possible.

Type of arc filter:

There are two types of arc filters used in treadmill designs. The first can be found in only the top-of-the-line brands, while the second is found throughout the industry.

The first works by dissipating high voltage through a resistor, then into an arc that is conducted away.

The second is usually more affordable and comes with carbon brushes inside of it.

Carbon brushes are conductive rods that come in contact with metal parts to complete the current circuit inside of the machine; they act as a filter and conduct the current away from any sensitive or expensive parts.

What is wall mounted arc filter?

The wall mounted arc filter for a treadmill is commonly used to replace or upgrade an old or inefficient standard air filter device.

Image source: fitnessrepairparts

It’s usually installed by simply screwing the arc filter onto an existing filter inside of the machine, securing it to the frame with insulation tape.

The wall mounted arc filter for a treadmill is one of the most affordable and practical ways to upgrade any machine’s airflow system, providing your machine with much more powerful yet safe airflow.

The wall-mounted arc filter for a treadmill will generally cost between $20 and $40 dollars depending on the brand and model.

If you have a high-end treadmill it will probably cost more than $20, while a low-end one will be less than $20.

Reasons for faulting Arc filter in a treadmill

1) If your treadmill is operating with a dim display or the console functions are not working correctly, you might need to change the control panel.

2) If your treadmill is beeping and/or you smell a burning smell, it might be time to replace the step-down transformer inside of your machine.

3) If your console or displays are working properly, but your belt is moving slowly, the control panel might need to be replaced.

4) If there is a powerful airflow coming from your treadmill’s blower but the belt won’t move, check to see if the idler pulley is working correctly.

How often should I change my arc filter?

Treadmill air filters typically need to be replaced every 3-6 months, depending on how often you use your machine.

The air passing through the filter will gradually wear it down over time as well as clog it.

When the arc filter is clogged with dirt, dust, and other particles from your workout, these contaminants will eventually wear down the carbon brushes that are inside.

Once those carbon brushes wear out, the treadmill won’t be able to power on. In some cases, a defective arc filter can cause a machine’s circuit board to fail.

The good news is that the filter is inexpensive and easy to replace, so you can always try changing it out yourself before consulting with a service professional.

Keep in mind that this part will need to be replaced every 3-6 months or sooner depending on use.

Is it okay to use a surge protector or a power strip for the arc filter with a treadmill?

Yes. When using a power strip or surge protector to plug in your treadmill, it’s important to understand how the current flows through your machine.

When your treadmill is plugged in, the current flows through to the power strip or surge protector first before it reaches your machine.

If the power strip is not grounded, it acts as an insulator and permanently damages both your treadmill’s control panel and any related electronics.

The power strip can also catch fire, so using one with your treadmill is a serious safety hazard.

In order to properly protect your treadmill from damage and keep your power strip from catching on fire, you should use the best quality surge protector for your treadmill.

Price of an arc filter for the treadmill:

An arc filter for the treadmill is usually priced around $30 to $100 dollars depending on quality. You can buy one from different stores such as Walmart, Home Depot, Sears, and Amazon.

Finally, a treadmill arc filter helps smooth & adjust the treadmill’s power output to avoid damage to its electrical components. If you use a treadmill at home, we highly recommend buying the arc filter for the life of your machine and for safety reasons.

Rate this post

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.