Are you looking for an in-depth answer to the question of how to tell if a surge protector is bad? If yes, keep reading.
A surge protector is designed to protect your electronic devices from damage due to power surges. When a surge protector fails, it will not be able to protect your electronics and can oftentimes cause damage to them.
If your surge protector has failed, there will be signs that it is no longer functional. Not thus there are more signs and ways to tell if a surge protector is bad other than the lack of its protective abilities.
Table of Contents
How to Identify a Bad Surge Protector?
While this is easy to answer, but it’s not so easy to do. I’ll start by saying that there are many fake surge protectors on the market. If you are not sure what exactly you purchased, then I can’t blame you for that because it’s easy to get scammed.
Below is a list of tips and tricks which could help you to identify a bad surge protector:
1) Feels hot:
A surge protector that feels hot is not protecting your electronics. If it is hot, this means there isn’t a good connection between the power source and the electrical device.
It may still be plugged in, but not working properly and can cause damage to your devices. Also, if the surge protector is hot, it may be in standby mode. So in this case, it won’t be able to protect your devices even if it is turned on.
2) Smells of burning plastic:
If there is a smell of burning plastic coming from the surge protector, it means that it is faulty. Sometimes, it may also mean that there is a fire hazard. So if you see this happen, check the device for any signs of overheating or burning. If you see either, turn off your surge protector right away.
3) Lamps flicker:
If your light bulbs are flickering when the surge protector is activated, it means that you are not getting the correct voltage. It can also mean that your wiring is faulty, which would require an electrician. If this is not the case, it can be a sign that your surge protector is faulty.
So, you should get a new surge protector if this is the case.
4) Plugged in but not working:
If your surge protector is plugged into an outlet or plugged into your electronic device, you’ll see that it’s not working. You should also check if there is no light on the surge protector or if it doesn’t have any power buttons.
So when you see this, it is a sign that your surge protector is faulty or that its internal components may have burnt out.
5) Broken fuse:
If your surge protector has a fuse and the glass is broken, then it’s time for you to get a new one. It can’t be fixed, so it’s time to get a new surge protector. Why does this happen? It’s most likely due to power surges.
If your surge protector fuse is broken and you’ve checked everything, it may be because of a power surge. Power surges happen when the voltage coming from your power source is too high.
6) It keeps turning off and on:
When it keeps turning off and on continuously, it means that your device is not grounded, or there may be a short circuit. So in this case, it won’t be able to protect your devices and can even cause damage to them.
If your surge protector keeps turning off and on continuously, that means, it is faulty. So when you see this happening, get a new one. Also, you’ll see that the lights on it are flashing. Sometimes, it will beep too.
7) The warranty has expired:
If your surge protector is past its warranty, you’ll need to get a new one if it’s faulty or not working right anymore. A good rule of thumb is that if the device is two years old, you should either replace it with a new surge protector or call an electrician to check the wiring in your house.
Although, most of the manufacturers offer more than 2 years of warranty, so it’s a good idea to check your surge protector for any signs of malfunction and get it serviced.
8) It’s old:
If your surge protector is more than 5 years old, you should consider replacing it with a new one. The main reason is that surge protectors do not last forever.
Most electricians recommend changing a surge protector every five years, whether it’s faulty or not. So if you want to avoid any electrical disasters, just go ahead and replace them.
9) It’s not grounded:
Sometimes, it can be hard to tell if your surge protector is not grounded. If the plug doesn’t fit snugly into an outlet, then it’s most likely not grounded. This can cause an electrical shock, so get it checked if you see this happen.
So this is one of the most important signs that your surge protector is bad or has lost its ability to protect you from electrical problems.
Is there any device to check bad surge protector?
If your want to identify/ test a bad surge protector yourself, you need to identify and measure the impedance between the hot and neutral legs of the AC power line.
In this, you can use a receptacle tester to check any improper wiring & resistance between the hot and neutral legs.
Can surge protectors wear out?
Yes, surge protectors can wear out and their ability to provide protection can diminish as they age. There is no way to know when a surge protector has started to wear out other than by inspecting it.
Carefully inspect all surge protectors for signs of damage or deterioration including loose, frayed, or bare wires, a swollen or bloated part, or a strip that has turned dark brown or black.
If you find any signs of damage or deterioration, do not use the surge protector. Dispose of the damaged surge protector properly and replace it with a new one.
Are old surge protectors safe?
An old surge protector can be perfectly safe to use. The only thing that can happen is a surge protector might be broken because it is old or has been used a lot.
Also, an old surge protector does not work automatically means that the device is defective or unsafe to use.
If the surge protector is broken because it has been used a lot, you have to replace it with a new one.
Can an RV surge protector go bad?
Yes. Most RV owners suggest they need to be replaced every 3-5 years, and sometimes sooner. But how does one know when it’s time?
To answer this question is that when you see the above-mentioned signs, you should replace them. But if you use it for many years, there is no guarantee that it will work well.
The final advice is for you that the above list is a general guideline, and it’s best to follow the instructions on your surge protector. If you’re not sure what to do with your surge protector, you should call a professional electrician.
Palash is an entrepreneur in the tech industry and the author of the Smart Home Protector. As a tech entrepreneur & reviewer of a home safety gadget store, his job helps customers remain on top of what’s coming next in our rapidly changing world.