How To Tell If A Ring Camera Is Recording?

Recording through a ring camera can be tricky. But assuring yourself that it is working properly is trickier. How can you handle recording important incident footage if you cannot tell whether your Ring Camera is working in order?

Something terrible can happen under your nose, leaving you restless, and you cannot even figure out what it is. So if you want to keep relaxed while having proof, you must acknowledge yourself about its functions.

So let’s find out here how to tell if a Ring Camera is recording in good order and by-rights.

If you check consciously, you will see a notification that the camera is recording by either the Ring app or the red light on the Ring Camera.

For some individuals, the primary edge of their protection against potential damage is their Ring Camera. When you know that your Ring Camera is recording, you can have an escape from the stress and headaches in the long run. It happens only by the thought that everything is recorded accordingly.

Note: There is a blue light function on a Ring camera as well. Do not confuse yourself with the red one. The blue one is the night vision light. It turns on automatically at night and should turn off when daytime returns.

Is Your Ring Camera Functioning Well?

You can probably continue waiting for the signal to notify yourself if the Doorbell Recording is working or not. But what if it starts malfunctioning or is unworthy to detect movements for recording?

Besides, do you think your Ring Cameras are always recording?

No, dear, No!

The Ring Camera doesn’t always record. It only records when a potential movement is detected through its lens. However, the Ring device is always watching for movements using its camera.

As we know until now, it only records when movement is detected, and even then, only for a minute or half at a time.

The Ring app connected to your device helps you to be notified when your Ring Camera begins to record. The alternative is to first step outside onto your porch. Then look for the tiny red LED light that says “Ring Camera is recording” to see if it’s on.

Several events could have occurred to cause your Ring Camera to start recording. Such as,

  • Activity/Movement
  • Noise/Sound
  • Manual Recording
  • Ringing Doorbell

Ring Camera Not Recording? Here’s What to Do!

Every device starts malfunctioning at a certain point after using it for a long time. Ring Camera is no different than other devices.

You should be aware of a few possible facts if your Ring Camera isn’t recording. Knowing how long your Ring Camera records is also important.

Read: How To Tell If A Security Camera Is On

Therefore, if your Ring Camera has not been explicitly recording everything, the issue is that it doesn’t show an instant view or record when someone is at the door. You receive an alert notification, but when you check the app, there is no activity. It didn’t record, not even when you tried it yourself.

All of these indicate that your Ring Camera may be having trouble connecting to your Ring app. And everything makes it difficult to use the Live View feature and begin recording.

If this occurs, a message will appear when you attempt to access Live View, stating, “We’re having trouble connecting to your Ring Video Doorbell.”

When you notice this message, you must understand that there is a problem with data transfer between your Ring Camera and the Ring app. Possible causes include:

1) Poor connection between devices and the Internet

When you face such a situation, ensure that each time you handle your device in reference to your Ring Camera, both modules are on the same WiFi network.

When both devices are connected to the same WiFi network, keep a look at the connection of your network signal on your device.

The speed of your WiFi connectivity is determined by various factors, the most important of which is the distance between you and the network connection.

When there are situations that hinder your WiFi signal from reaching you effectively, you may need to reconsider where you should place the router.

2) Check the WiFi/Internet speed

The Federal Communications Commission (FCC) regulates the minimum download speed as 25 Megabits per second (Mbps); anything higher than that, and you’re good to go.

WiFi-Internet speed

The Ring Camera is the most effective at upload and download speeds of 2 Mbps. However, be cautious when testing your Internet speeds.

The more devices you connect to a router, the slower your Internet will become. For example, suppose you have a router that emits at 100 Mbps, but you also have:

  • Gaming consoles
  • Ring Camera
  • Three Smart TVs
  • Multiple smartphones, tablets, and laptops

Note: Each of these following devices linked to that 100 Mbps router will have a slow connection. Purchase a router that will meet your and your family’s requirements. Perform an Internet speed test to check your upload and download speeds.

Even if no one is using the Internet, your Internet will become slower during certain peak hours. Throughout those rush hours, the Internet network that you subscribed to has other users, and those users are all on the Internet at the same time, clogging it up.

As a result, even if you are not gaming or streaming movies, you may experience some lags late at night.

3) Connectivity issues or lagging from Ring Camera to the router

One of the main reasons your Ring camera will not work or record is a lack of connectivity. This device relies on a stable internet connection to update recorded snaps to the cloud and send them to you to watch on your smartphone or tablet.

So, use one of the following troubleshooting steps to resolve your connectivity issues:

  • Restart the router and turn off the camera.
  • Improved WiFi signal power.
  • Reduce wireless interference.
  • Select the 2.4GHz channel.
  • Upgrade the firmware on the router.
  • Reboot your router.

Note: Please remember that the Ring Spotlight Cam only supports a minimum upload speed of 1Mbps, but 2 Mbps is strongly suggested for optimal performance; meanwhile, the Ring Stick Up demands a high-speed internet connection.

If you are still unable to resolve your recording concern, Ring has customer service representatives available to assist you.

Contact Customer Service for Help and support

Once you finish trying all the following methods and learn that none of these are working, finding the same Ring Camera malfunctioning issue or security issue within any of the services or devices, contact the customer support system.

Once you report the problem, Ring support agents will review your video recordings related to assisting you and resolving your issue.

The customer support team may ask for access to your Ring system. You can let them have temporary access to all of your video recordings.

If you believe that certain videos will not assist the support agents in resolving the recording issue, you are not required to allow them access to the video and replace your Ring Camera with a new one.

Bottom Line

If your Ring Camera does not seem to be recording, make sure it is turned on and check the configurations to see if the recording is turned off. Lastly, you can request remote assistance from Ring’s technical support.

How useful was this post?

Click on a star to rate it!

Share your love
Bobby Taylor

Bobby Taylor

I'm Bobby Taylor, a tech lover, writer, and editor for Smart Home Protector. I am also a customer relationship officer of a well established electronics manufacturer company in the United States.

Articles: 89

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.