Sometimes we need to use more electric devices in one place. In this case, one power strip/surge protector cannot cover many devices. That’s why most households have more than one power strip or power extension. Mostly these can be mounted on the wall. However, it can be a problem to install them correctly, especially for novice electricians.
So if you are still thinking about how to mount the power strip to the wall? Then this article might help you.
General Things About Power Strip
The power strip is a device mainly used to protect the connected devices against power surges. Some of them have extension cords while others do not. They usually consist of a long cord that is plugged into the main supply and then connected to the socket at the end. The outlet has a switch with several slots to accommodate the plugs.
The power strip is a kind of multi-socket adapter that can be controlled by a switch. It also protects against power surges with an inbuilt circuit breaker.
How to mount a power strip on the wall? Step by step
Mounting a power strip on the wall can be a good solution in some cases. You can do it easily, just follow the simple steps given below:
What you’ll need to mount a power strip:
To properly mount your power strip on the wall, you need the following:
- Screws (the right size and length depending on the wall)
- A drill with a screwdriver bit
- A power strip
- A pencil
- Masking Tape
Step 1: Mark the spots you will attach the screws. You can make marks with a pencil or any other marker. Make sure they are level with each other. To be more specific, the distance between the center of the holes on the power strip should be equal to that of the screws.
Step 2: Put the power strip on the wall where you want to mount it. Hold it by holding the screws with one hand and pressing it against the wall with your other hand. Make sure it is level and mark where you will drill holes.
Step 3: Draw a line on the wall with your pencil, where you will drill the holes for the screws.
Step 4: Drill the holes. Make sure that all the screws are drilled to the same depth.
Step 5: Place the power strip on the wall and screw it with screws. Check whether it is properly fixed and tighten it.
There you go, now you know how to mount a power strip on the wall. Although this might seem a bit difficult at first, it is a really easy process.
What things you should not do after mounting a power strip on the wall?
After you mount the power strip on the wall, there are some things you should avoid doing.
- Do not attempt to move it frequently as this can cause a power strip to fall down which is a fire hazard.
- Do not overload the power strip as this can also cause it to overheat.
- In case you have multiple extension cords, do not run them through one another as this will restrict the performance of both devices and will create a huge mess.
- Do not cover the power strip with a cloth or any other material as this can lead to overheating.
- Do not place a heavy object on top of the power strip.
- Do not connect over devices to a single power strip as this causes overheating and can cause damage to both extension cords and devices connected.
- You should not use a power strip in the construction site & hospital.
When you mount a power strip on the wall make sure you follow all the steps correctly to avoid any accidents.
Guide to mount a power strip on the wall without using nails
Another method is to mount a power strip on the wall without using nails. If you want to do this, then need the following tools first.
- 1 power strip
- 4 zip ties
- 1 screw with a hexagonal head
- 1 plastic hook.
Below is the step by step guide on how to mount a power strip on the wall without using nails:
Step 1: Prepare your power strip first. Detach it from the other parts and then zip tie the cord into a loop to prevent it from retracting.
Step 2: Zip tie the other end of the cord to one end of your screw as well. Make sure that it is mounted on the wall at the appropriate height level. Use a pencil to mark where you will attach it on the wall first.
Step 3: Once you mark where you will attach the screw, poke a hole with your screwdriver bit to drill through. Make sure that it is not too small or too large, the hole should be just enough to accommodate your screw.
Step 4: Attach one end of another zip tie on the wall where you will attach the screw.
Step 5: Attach your plastic hook on top of it.
Step 6: Zip tie your power strip to the plastic hook. Make sure that it is tight and in a straight line with the zip tie on the wall.
Step 7: Tighten both screws with your screwdriver.
This is how you can mount a power strip on the wall without using nails. The advantage of this method is that if you wish to move the power strip, you can easily unplug it and bring it with you.
Tips to mount a power strip to a wall without screws
This is our 3rd method to mount a power strip on the wall without using screws. If you want to know how to mount a power strip on the wall without screws, make sure to follow the below steps.
What things you need for this method:
- Power Strip
- Velcro strips (get it from any local hardware store, mine is called Industrial Strength Velcro Strips )
- A drill
Step by step:
Step 1: Take off your power strip from its packaging.
Step 2: Cut the Velcro strips according to the size of your power strip.
Step 3: Drill two holes at the back of your power strip, according to how you want to mount it on the wall.
Step 4: Stick your Velcro strips onto your power strip.
Step 5: Mount your power strip to the wall.
That’s it, you’ve successfully mounted a power strip to the wall without using screws.
Beginner guide to mount a power strip without holes in the wall
This is our 4th method to mount a power strip on the wall. This method will help you to mount a power strip without holes and you will not need any hole in the wall to mount it.
What materials you need to mount a power strip without holes in the wall:
- Power strip
- Power strip bracket
- Anchors and screws
Steps to mount a power strip without holes in the wall:
- Step 1: Take off the cover of the power strip
- Step 2: Put an anchor when you need to mount on a wall or brick etc.
- Step 3: Put the power strip into the bracket.
- Step 4: Tighten screws.
And then, that’s all for the steps to mount a power strip without holes.
It depends on the type of power strip you buy. You can also mount a power strip without having to spend too much if you follow the above steps.
Mount your power strip at a height that is comfortable for you. You can mount it from waist to knee level or even higher depending on how high your power strip’s cord can reach.
For hanging a power strip with KLAPiTs, you will need 1 KLAPiT for each power strip.
Yes, it is safe to mount a surge protector/power strip on the wall. They’re designed to protect your devices from sudden power surges so there’s no need to be concerned about their safety.
You can mount your power strip near your desk, behind your couch, or on your wall. Mostly it depends on where you usually plug in your devices. Keep in mind, you should mount your power strip such as a place where your baby or pets can’t reach it.
You should use a screw that is small enough to be hidden by the cover of your power strip.
If you cannot mount your power strip, you can use Velcro strips to mount your power strip on the wall without screws. You can buy Velcro strips from any local hardware store.
A power strip is an essential tool for your home. You can plug multiple devices into your power strip at the same time. To properly use a power strip in-home or other places you can follow the above method to mount it on a wall with or without screws.
You can also check our recommended pieces of advice after you mount your power strip on the wall. Finally, don’t forget to mount your power strip in the proper place.
Palash is an entrepreneur in the tech industry and the author of the Smart Home Protector. As a tech entrepreneur & reviewer of a home safety gadget store, his job helps customers remain on top of what’s coming next in our rapidly changing world.